Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 7 months ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SOT-23-6 |
Number of Pins |
6 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Type |
Multi-Voltage Supervisor |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
675mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.95mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
STM6778 |
Output |
Push-Pull, Totem Pole |
Pin Count |
6 |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
800mV |
Operating Supply Current |
35μA |
Nominal Supply Current |
35μA |
Power Dissipation |
675mW |
Max Supply Current |
35μA |
Adjustable Threshold |
YES |
Watchdog Timer |
No |
Reset |
Active Low |
Voltage - Threshold |
1.05V 2.925V |
Number of Voltages Monitored |
2 |
Reset Timeout |
140ms Minimum |
Undervoltage Threshold |
1.02V |
Overvoltage Threshold |
1.08V |
Height Seated (Max) |
1.45mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
STM6778SFWB6F Overview
There are 6 terminals on this power management that allow it to be mounted. There is a Tape & Reel (TR)-packaging method applied to IC management. As a reference, this IC management includes 1 functions for your convenience. This power management is made up of 1 channels which are available in a series format. For your reference, this PMIC includes a list of SOT-23-6 functions. Several of the benefits of this PMIC are also shared by other Multi-Voltage Supervisor products. Specifies a reflow peak temperature of 260 for the package during reflow. There is a voltage supply of 3.3V for the PMIC chip, and the chip conducts at that voltage. A supply voltage of 2 is used to conduct the PMIC chip. The power management is mounted by Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. In total, the power management has 6 pins in it. Pin count of the power management is 6. Supply voltage (Vsup) should be at least 800mV for this power management. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. In this case, Surface Mount is the recommended mounting type. You should set the supervisor's temperature during -40°C~85°C TA . There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. Supplied with a operating current of 35μA, this PMIC is capable of fully function as specified. A similar IC managements number of the manufacturer can always be found by using STM6778, the base power ics number. A maximum supply temperature of 35μA can be used with this power management.
STM6778SFWB6F Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
35μA operating supply current
STM6778SFWB6F Applications
There are a lot of STMicroelectronics STM6778SFWB6F Voltage Supervisors applications.
- Insulation fault location system
- Power communication system
- Kitchen appliances
- Electronics installed in the vehicle
- Low voltage/high power - AI, GPU
- Precision measurement
- Leakage current detection
- Functional modules
- Computer applications
- DC stabilized power supply module