STM6904PWEDS6F
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | STM6904 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Number of Channels | 4 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 800mV |
| Operating Supply Current | 14μA |
| Max Supply Current | 14μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 1.683V 2.866V Adj Adj |
| Number of Voltages Monitored | 4 |
| Reset Timeout | 140ms Minimum |
| Undervoltage Threshold | 1.666V |
| Overvoltage Threshold | 1.7V |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STM6904PWEDS6F Overview
Power management is mounted through 8 terminals. It is packaged with Tape & Reel (TR). In this PMIC, you can find 1 functions for your reference. Depending on the power managment ic you are looking at, you can find a total of 4 channels. Please find attached 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) functions for your reference in this IC power. There are many benefits that this IC power shares with other Multi-Voltage Supervisor products as well. Specifies a reflow peak temperature of 260 for the package during reflow. Power management conducts at a voltage of 4. Surface Mount mounts IC management. The power management belongs to the Power Management Circuits subcategory. In total, the power management has 8 pins in it. The pins of the power management system count 8. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 800mV. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Surface Mount is the recommended mounting type. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. As far as the supply current of the power management is concerned, it is 14μA. For similar manage ics search of the manufacturer, you can always refer to STM6904, the base PMIC number. Voltage supervisor can work with a supply temperature of 14μA at the most.
STM6904PWEDS6F Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
14μA operating supply current
STM6904PWEDS6F Applications
There are a lot of STMicroelectronics STM6904PWEDS6F Voltage Supervisors applications.
- Power distribution systems of infant care room
- Utility meter
- Stable power system
- Solar power charger
- Magnetic resonance imaging
- Important electronics for automotive protection
- Battery cars
- Power communication system
- Insulation fault location system
- Unattended substation automation
