banner_page

STM6904SFEDS6F

8 Terminals 8-Pin STM6904 Voltage supervisor4 Channels Min 800mV Max 5.5V


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-STM6904SFEDS6F
  • Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
  • Datasheet: PDF
  • Stock: 745
  • Description: 8 Terminals 8-Pin STM6904 Voltage supervisor4 Channels Min 800mV Max 5.5V (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 7 months ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins 8
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Multi-Voltage Supervisor
Subcategory Power Management Circuits
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Terminal Pitch 0.65mm
Base Part Number STM6904
Output Open Drain or Open Collector
Pin Count 8
Number of Channels 4
Max Supply Voltage 5.5V
Min Supply Voltage 800mV
Operating Supply Current 14μA
Max Supply Current 14μA
Adjustable Threshold YES
Watchdog Timer No
Reset Active Low
Voltage - Threshold 1.05V 2.955V Adj Adj
Number of Voltages Monitored 4
Reset Timeout 140ms Minimum
Undervoltage Threshold 1.04V
Overvoltage Threshold 1.061V
Height Seated (Max) 1.1mm
Length 3mm
Width 3mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

STM6904SFEDS6F Overview


There are 8 terminals connected to this power management, which makes it easy to mount. It is packaged with Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. It is possible to find on this power management a series of 4 channels. In this IC management you will find 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) functions for you to refer to. It is a IC power that shares many benefits with other products from the Multi-Voltage Supervisor line. A supply voltage of 4 is used to conduct the PMIC chip. The mount is provided by Surface Mount. A IC power such as this can be classified as a Power Management Circuits power management system. In total, the power management has 8 pins in it. 8 pins make up the power management. IC management can only work with a supply voltage of 800mV volts. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. In this case, Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. There is a 14μA supply current present in the power management. You can always use STM6904, the base supervisor number, to search for similar PMICs of the manufacturer. At most, voltage supervisor can operate at a supply temperature of 14μA.

STM6904SFEDS6F Features


Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
14μA operating supply current

STM6904SFEDS6F Applications


There are a lot of STMicroelectronics STM6904SFEDS6F Voltage Supervisors applications.

  • Power distribution systems of operating room
  • Unattended substation automation
  • Solar power charger
  • Functional modules
  • Insulation fault location system
  • Rechargeable batteries
  • Analog circuit
  • Fire equipment power monitoring system
  • Digitally controlled LDO regulators circuit
  • Linux and server computing

Write a review

Note: HTML is not translated!
    Bad           Good