STM6904TGEDS6F
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | STM6904 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Number of Channels | 4 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 800mV |
| Operating Supply Current | 14μA |
| Max Supply Current | 14μA |
| Adjustable Threshold | YES |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 1.11V 3.078V Adj Adj |
| Number of Voltages Monitored | 4 |
| Reset Timeout | 140ms Minimum |
| Undervoltage Threshold | 1.099V |
| Overvoltage Threshold | 1.121V |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STM6904TGEDS6F Overview
There are 8 terminals on this power management that allow it to be mounted. Power management is packaged in a Tape & Reel (TR) way. Power management is possible to find a series of 1 functions. This power management is made up of 4 channels which are available in a series format. As a reference, this IC power includes 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) functions for your convenience. There are a lot of similarities between this IC power and other Multi-Voltage Supervisor products. A supply voltage of 4 is used to conduct the PMIC chip. Using Surface Mount, IC management is mounted. A IC power such as this can be classified as a Power Management Circuits power management system. It has a total of 8 pins that are attached to IC management. 8 pins are on the supervisor. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 800mV. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. A Surface Mount mounting type is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. The supply current of the power management is 14μA. It is always advisable to use STM6904, the base supervisor number, when searching for similar PMICs from the manufacturer. The power management can work with a maximum supply temperature of 14μA.
STM6904TGEDS6F Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
14μA operating supply current
STM6904TGEDS6F Applications
There are a lot of STMicroelectronics STM6904TGEDS6F Voltage Supervisors applications.
- Electrical fire monitoring system
- Medical-specific insulation monitor
- Kitchen appliances
- Battery-powered equipment
- Microcontroller system
- DSP
- Microprocessor system
- Leakage current detection
- Cloud computing
- Personal computers
