STM690SM6F
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 320mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STM690 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 3.3/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 60μA |
| Nominal Supply Current | 60μA |
| Power Dissipation | 320mW |
| Max Supply Current | 60μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 2.925V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 2.85V |
| Max Reset Threshold Voltage | 3V |
| Undervoltage Threshold | 2.85V |
| Overvoltage Threshold | 3V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STM690SM6F Overview
A total of 8 terminals are used to mount this power management. Packaging is in the form of a Tape & Reel (TR). Please refer to this PMIC for 1 functions. This power management is made up of 1 channels which are available in a series format. The purpose of this IC power is to provide you with a reference of 8-SOIC (0.154, 3.90mm Width) functions. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. Packages are specified to have an average peak reflow temperature of 260. The supervisor is always powered by a 3.6V volt supply. When 1 is applied to the power ic, it conducts. The power management is mounted by Surface Mount. This power ic can be sub-categorized as Power Management Circuits. It has a total of 8 pins that are attached to IC management. There are 8 pins on the power managment ic. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Surface Mount mounting is recommended. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. Supplied with a operating current of 60μA, this PMIC is capable of fully function as specified. If you want to search for similar IC managements of this manufacturer, you can always refer to STM690, which is the base power ics number. The power management must be powered by 3.3/5V volts to function properly. The maximum supply temperature voltage supervisor can handle is 60μA.
STM690SM6F Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
STM690SM6F Applications
There are a lot of STMicroelectronics STM690SM6F Voltage Supervisors applications.
- Detection of phase sequence
- Personal computers
- Detection of phase loss
- DSP
- FPGA design
- Power communication system
- Leakage current detection
- Important electronics for automotive protection
- Satellite navigation
- Rechargeable batteries
