STM704SM6F
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 320mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STM704 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 3.3/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 60μA |
| Nominal Supply Current | 60μA |
| Power Dissipation | 320mW |
| Max Supply Current | 60μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.925V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 2.85V |
| Max Reset Threshold Voltage | 3V |
| Undervoltage Threshold | 2.85V |
| Overvoltage Threshold | 3V |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STM704SM6F Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. Packaging is in the form of a Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. A series of 1 channels can be found on this supervisor. To assist you, this PMIC includes 8-SOIC (0.154, 3.90mm Width) functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. Specifies a reflow peak temperature of 260 for the package during reflow. There is a voltage supply of 3.6V for the PMIC chip, and the chip conducts at that voltage. During operation, the power ic is supplied with a voltage of 1. By Surface Mount, IC management has been mounted. This power ic can be sub-categorized as Power Management Circuits. Taking into account all of the pins, this power management has a total of 8. There are 8 pins on the supervisor. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Mounting type Surface Mount is recommended. Temperature setting for the supervisors should be -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. In order to maintain a stable supply current for the power management, 60μA is the recommended value. It is always advisable to use STM704, the base supervisor number, when searching for similar PMICs from the manufacturer. It is necessary to have 3.3/5V volts of power in order for this voltage supervisor to operate. A maximum supply temperature of 60μA can be used with this power management.
STM704SM6F Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
STM704SM6F Applications
There are a lot of STMicroelectronics STM704SM6F Voltage Supervisors applications.
- Automotive permanent magnet synchronous motors
- FPGA design
- Electric heating appliances
- External alarm
- DC stabilized power supply module
- Battery cars
- Battery-powered equipment
- Power distribution systems of operating room
- Rechargeable batteries
- Detection of phase sequence
