Parameters |
Operating Supply Current |
40μA |
Nominal Supply Current |
60μA |
Power Dissipation |
320mW |
Max Supply Current |
60μA |
Adjustable Threshold |
NO |
Watchdog Timer |
Yes |
Reset |
Active Low |
Voltage - Threshold |
2.63V |
Number of Voltages Monitored |
1 |
Reset Timeout |
140ms Minimum |
Min Reset Threshold Voltage |
2.55V |
Max Reset Threshold Voltage |
2.7V |
Undervoltage Threshold |
2.55V |
Overvoltage Threshold |
2.7V |
Height |
1.5mm |
Length |
5mm |
Width |
4mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
JESD-609 Code |
e4 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Simple Reset/Power-On Reset |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
320mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
STM706 |
Output |
Push-Pull, Totem Pole |
Pin Count |
8 |
Power Supplies |
3/5V |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1V |
STM706RM6E Overview
There are 8 terminals connected to this power management, which makes it easy to mount. It is packaged with Tube. The purpose of this IC management is to provide you with a reference of 1 functions. There are 1 channels on this power managment ic that can be found in a series. In this PMIC, you can find 8-SOIC (0.154, 3.90mm Width) functions for your reference. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. The package peak reflow temperature is specified to be 260. A supply voltage of 3V is used to conduct the PMIC chip. IC management conducts in a 1-voltage supply. By Surface Mount, IC management has been mounted. There is a subcategory called Power Management Circuits for this power management. In total, the power management has 8 pins in it. There are 8 pins on the power managment ic. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Surface Mount mounting is recommended. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. There is a 40μA supply current present in the power management. It is always advisable to use STM706, the base supervisor number, when searching for similar PMICs from the manufacturer. A power supply of 3/5V watts is required for the operation of this power management. A maximum supply temperature of 60μA can be used with this power management.
STM706RM6E Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
40μA operating supply current
STM706RM6E Applications
There are a lot of STMicroelectronics STM706RM6E Voltage Supervisors applications.
- FPGA design
- Microprocessor system
- Computer applications
- Dash board
- Efficient information transmission
- Leakage current detection
- Important electronics for automotive protection
- Power distribution systems of operating room
- Data storage applications
- Low voltage/high power - AI, GPU