STM706TM6E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 320mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STM706 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 3.3/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 40μA |
| Nominal Supply Current | 60μA |
| Power Dissipation | 320mW |
| Max Supply Current | 60μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 3.08V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 3V |
| Max Reset Threshold Voltage | 3.15V |
| Undervoltage Threshold | 3V |
| Overvoltage Threshold | 3.15V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STM706TM6E Overview
As you can see, this power management is mounted through 8 terminals. Tube-packaging is used. Power management is possible to find a series of 1 functions. There are 1 channels on this power managment ic that can be found in a series. Please find attached 8-SOIC (0.154, 3.90mm Width) functions for your reference in this IC power. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. There is a specification for the peak reflow temperature of the package to be 260. When 3.3V is applied to the power ic, it conducts. IC management is possible to find a succession of 1 voltages that have been checked. The mount is provided by Surface Mount. There is a subcategory of this power ic known as Power Management Circuits. The total number of pins on this power management is 8. Power managment ic pin count is 8. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). The recommended mounting type is Surface Mount. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. There is a 40μA supply current present in the power management. It is always advisable to use STM706, the base supervisor number, when searching for similar PMICs from the manufacturer. It is necessary to have 3.3/5V volts of power in order for this voltage supervisor to operate. A maximum supply temperature of 60μA can be used with this power management.
STM706TM6E Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
40μA operating supply current
STM706TM6E Applications
There are a lot of STMicroelectronics STM706TM6E Voltage Supervisors applications.
- Linux and server computing
- Microcontroller system
- DSP
- emergency room
- Microprocessor system
- Automotive permanent magnet synchronous motors
- WiFi router
- Stable power system
- Detection of phase loss
- Low voltage/high power - AI, GPU
