STM708RM6F
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 320mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STM708 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 60μA |
| Nominal Supply Current | 60μA |
| Power Dissipation | 320mW |
| Max Supply Current | 60μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 2.63V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 2.55V |
| Max Reset Threshold Voltage | 2.7V |
| Undervoltage Threshold | 2.55V |
| Overvoltage Threshold | 2.7V |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STM708RM6F Overview
There are 8 mounting terminals on the voltage supervisor, each of which has a different function. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. In this IC power you will find 1 functions for you to refer to. It is possible to find on this power management a series of 1 channels. For your reference, this PMIC includes a list of 8-SOIC (0.154, 3.90mm Width) functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 260. When a supply voltage of 3V is applied to the power ic, it conducts. IC management is possible to find a succession of 1 voltages that have been checked. By Surface Mount, IC management has been mounted. A IC power such as this can be classified as a Power Management Circuits power management system. There are a total of 8 pins on power management. 8 pins make up the power management. Supply voltage (Vsup) should be at least 1V for this power management. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The recommended mounting type is Surface Mount. Temperature setting for the supervisors should be -40°C~85°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. The power management's supply current is 60μA. A similar IC managements number of the manufacturer can always be found by using STM708, the base power ics number. It requires 3/5V watts of power to operate this voltage supervisor. The maximum supply temperature voltage supervisor can handle is 60μA.
STM708RM6F Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
STM708RM6F Applications
There are a lot of STMicroelectronics STM708RM6F Voltage Supervisors applications.
- Digitally controlled LDO regulators circuit
- Utility meter
- Urban rail transit weak current power monitoring
- Precision measurement
- Multi-voltage system
- Insulation fault location system
- Efficient information transmission
- Detection of phase sequence
- Kitchen appliances
- Important electronics for automotive safety
