STM708TM6E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 320mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STM708 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 3.3/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 60μA |
| Nominal Supply Current | 60μA |
| Power Dissipation | 320mW |
| Max Supply Current | 60μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 3.08V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 3V |
| Max Reset Threshold Voltage | 3.15V |
| Undervoltage Threshold | 3V |
| Overvoltage Threshold | 3.15V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STM708TM6E Overview
This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. Tube-packaging is used. Please find attached 1 functions for your reference in this IC power. Power management consists of 1 channels, each of which can be used independently. Please refer to power management for 8-SOIC (0.154, 3.90mm Width) functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. In a 3.3V supply voltage, the power management conducts. In a 1 supply voltage, the PMIC chip conducts. The mount is provided by Surface Mount. The power management belongs to the Power Management Circuits subcategory. In total, it has 8 pins on IC management. Power managment ic pin count is 8. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. The recommended mounting type is Surface Mount. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. Supplied with a operating current of 60μA, this PMIC is capable of fully function as specified. It is always advisable to use STM708, the base supervisor number, when searching for similar PMICs from the manufacturer. To be able to work, this power management requires 3.3/5V volts of power. At most, voltage supervisor can operate at a supply temperature of 60μA.
STM708TM6E Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
STM708TM6E Applications
There are a lot of STMicroelectronics STM708TM6E Voltage Supervisors applications.
- Kitchen appliances
- Magnetic resonance imaging
- Refrigeration
- FPGA design
- Power distribution systems of operating room
- Microcontroller system
- Unattended substation automation
- Dash board
- Rechargeable batteries
- Analog circuit
