STM795RM6F
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 320mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STM795 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 60μA |
| Nominal Supply Current | 60μA |
| Power Dissipation | 320mW |
| Max Supply Current | 60μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.625V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 2.55V |
| Max Reset Threshold Voltage | 2.7V |
| Undervoltage Threshold | 2.55V |
| Overvoltage Threshold | 2.7V |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STM795RM6F Overview
There are 8 mounting terminals on the voltage supervisor, each of which has a different function. Packaging is in the form of a Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. There are a total of 1 channels on this supervisor, and they are arranged in a series. Please find attached 8-SOIC (0.154, 3.90mm Width) functions for your reference in this IC power. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. The package peak reflow temperature is specified to be 260. When 3.6V is applied to the power ic, it conducts. When a supply voltage of 1 is applied to the power ic, it conducts. The mount is provided by Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. In total, it has 8 pins on IC management. This power management has 8 pins. IC management can only work with a supply voltage of 1V volts. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. In this case, Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. For this power management, there is an 60μA volt supply current. To find similar IC managements from the manufacturer, you can always search by STM795. It is necessary to have 3/5V volts of power in order for this voltage supervisor to operate. The maximum supply temperature voltage supervisor can handle is 60μA.
STM795RM6F Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
STM795RM6F Applications
There are a lot of STMicroelectronics STM795RM6F Voltage Supervisors applications.
- DSP
- Power distribution systems of ICU
- Leakage protection
- Smart meter
- Microcontroller system
- Medical-specific isolation transformer
- Insulation fault location system
- Multi-voltage system
- Fire equipment power monitoring system
- Detection of phase imbalance
