STM795TM6E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 320mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STM795 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Power Supplies | 3.3/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 60μA |
| Nominal Supply Current | 60μA |
| Power Dissipation | 320mW |
| Max Supply Current | 60μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 3.075V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Common Mode Rejection Ratio | 70 dB |
| Gain Bandwidth Product | 1.3MHz |
| Voltage Gain | 100dB |
| Min Reset Threshold Voltage | 3V |
| Max Reset Threshold Voltage | 3.15V |
| Undervoltage Threshold | 3V |
| Overvoltage Threshold | 3.15V |
| Max Dual Supply Voltage | 15V |
| Min Dual Supply Voltage | 1.5V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STM795TM6E Overview
A total of 8 terminals are used to mount this power management. Packaged in a Tube-shape, IC management comes with a number of features. Please refer to this PMIC for 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. IC management is packaged as a 8-SOIC (0.154, 3.90mm Width) package. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 260 for the package during reflow. When 3.6V is applied to the power ic, it conducts. In a 1 supply voltage, the PMIC chip conducts. Surface Mount mounts IC management. There is a subcategory of this power ic known as Power Management Circuits. In total, it has 8 pins on IC management. 8 pins are present on the power management system. Supply voltage (Vsup) should be at least 1V for this power management. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. In this case, Surface Mount is the recommended mounting type. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. The power management's supply current is 60μA. A similar IC managements number of the manufacturer can always be found by using STM795, the base power ics number. The voltage supervisor requires a power source of 3.3/5V volts in order to work correctly. A maximum supply temperature of 60μA can be used.
STM795TM6E Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
STM795TM6E Applications
There are a lot of STMicroelectronics STM795TM6E Voltage Supervisors applications.
- Military electronics
- Set top box
- Important electronics for automotive safety
- Electrical fire monitoring system
- WiFi router
- Magnetic resonance imaging
- Urban rail transit weak current power monitoring
- Medical-specific insulation monitor
- Analog circuit
- Medical-specific isolation transformer
