STM805LM6F
| Parameters | |
|---|---|
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 320mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STM805 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 60μA |
| Nominal Supply Current | 60μA |
| Power Dissipation | 320mW |
| Max Supply Current | 60μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High |
| Voltage - Threshold | 4.65V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
STM805LM6F Overview
Power management is mounted through 8 terminals. This power ic is packaged in a way that looks like a Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. It is possible to find on this power management a series of 1 channels. For your reference, this PMIC includes a list of 8-SOIC (0.154, 3.90mm Width) functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. IC management conducts at a voltage of 5V. When 1 is applied to the power ic, it conducts. The mount is provided by Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. It has a total of 8 pins that are attached to IC management. 8 pins make up the power management. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. In this case, Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. The supervisor's supply current is specified to 60μA. You can always use STM805, the base supervisor number, to search for similar PMICs of the manufacturer. To be able to work, this power management requires 5V volts of power. A maximum supply temperature of 60μA can be used.
STM805LM6F Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
STM805LM6F Applications
There are a lot of STMicroelectronics STM805LM6F Voltage Supervisors applications.
- Battery-powered equipment
- Utility meter
- Important electronics for automotive protection
- Battery cars
- Kitchen appliances
- Transformer load monitoring equipment
- Power distribution systems of ICU
- Medical-specific isolation transformer
- External alarm
- Consumer electronics
