STM805SM6F
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 320mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STM805 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Power Supplies | 3.3/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 400nA |
| Nominal Supply Current | 60μA |
| Power Dissipation | 320mW |
| Max Supply Current | 60μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High |
| Voltage - Threshold | 2.925V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 2.85V |
| Max Reset Threshold Voltage | 3V |
| Undervoltage Threshold | 2.85V |
| Overvoltage Threshold | 3V |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
STM805SM6F Overview
As you can see, this power management is mounted through 8 terminals. In terms of packaging, power management follows the Tape & Reel (TR) model. Please find attached 1 functions for your reference in this IC power. There are 1 channels on this power managment ic that can be found in a series. In this IC management you will find 8-SOIC (0.154, 3.90mm Width) functions for you to refer to. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 260. During operation, the power ic is supplied with a voltage of 3.6V. When a supply voltage of 1 is applied to the power ic, it conducts. The mount is attached to Surface Mount. The power management system can be categorized as a Power Management Circuits chip. Power management has a total of 8 pins. This power management has 8 pins. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Surface Mount mounting is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. The supply current of the power management is 400nA. If you want to search for similar IC managements of this manufacturer, you can always refer to STM805, which is the base power ics number. This power management requires 3.3/5V power to work. A maximum supply temperature of 60μA can be used.
STM805SM6F Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
400nA operating supply current
STM805SM6F Applications
There are a lot of STMicroelectronics STM805SM6F Voltage Supervisors applications.
- Network equipment
- Battery cars
- Stable power system
- Precision measurement
- Digitally controlled LDO regulators circuit
- Power distribution systems of ICU
- Medical-specific isolation transformer
- Leakage current detection
- Set top box
- Solar power charger
