STM806RM6E
| Parameters | |
|---|---|
| Undervoltage Threshold | 2.59V |
| Overvoltage Threshold | 2.7V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 320mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STM806 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 60μA |
| Nominal Supply Current | 60μA |
| Power Dissipation | 320mW |
| Max Supply Current | 60μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.625V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 2.59V |
| Max Reset Threshold Voltage | 2.7V |
STM806RM6E Overview
Power management is mounted through 8 terminals. Packaged in the form of a Tube, power management is easy to use. In this IC power you will find 1 functions for you to refer to. Power management consists of 1 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of 8-SOIC (0.154, 3.90mm Width) functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. There is a specification for the peak reflow temperature of the package to be 260. IC management conducts at a voltage of 3.6V. Power management conducts at a voltage of 1. Using Surface Mount, IC management is mounted. It is possible to subcategorize this power ic as a Power Management Circuits chip. Taking into account all of the pins, this power management has a total of 8. 8 pins are present on the power management system. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). A Surface Mount mounting type is recommended. The supervisors should be set to the following temperature: -40°C~85°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. As far as the supply current of the power management is concerned, it is 60μA. To find similar IC managements from the manufacturer, you can always search by STM806. In order to operate this power management, it requires 3/5V volts of power. A maximum supply temperature of 60μA can be used.
STM806RM6E Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
STM806RM6E Applications
There are a lot of STMicroelectronics STM806RM6E Voltage Supervisors applications.
- Sensitive sensors
- Battery cars
- Precision measurement
- Battery cars
- DVR
- Data storage applications
- Power distribution systems of CCU
- Detection of phase sequence
- Analog circuit
- Fire equipment power monitoring system
