STM806RM6F
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 320mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STM806 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 60μA |
| Nominal Supply Current | 60μA |
| Power Dissipation | 320mW |
| Max Supply Current | 60μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.625V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 2.59V |
| Max Reset Threshold Voltage | 2.7V |
| Undervoltage Threshold | 2.59V |
| Overvoltage Threshold | 2.7V |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STM806RM6F Overview
There are 8 terminals on this power management that allow it to be mounted. It is packaged with Tape & Reel (TR). In this PMIC, you can find 1 functions for your reference. Depending on the power managment ic you are looking at, you can find a total of 1 channels. To assist you, this PMIC includes 8-SOIC (0.154, 3.90mm Width) functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. Packages are specified to have an average peak reflow temperature of 260. The supervisor is always powered by a 3.6V volt supply. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Using Surface Mount, IC management is mounted. There is a subcategory called Power Management Circuits for this power management. It has a total of 8 pins that are attached to IC management. There are 8 pins on the supervisor. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Surface Mount mounting is recommended. Temperature setting for the supervisors should be -40°C~85°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. It is estimated that the voltage supervisor's supply current is 60μA. To find similar IC managements from the manufacturer, you can always search by STM806. In order to operate this power management, it requires 3/5V volts of power. Voltage supervisor can work with a supply temperature of 60μA at the most.
STM806RM6F Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
STM806RM6F Applications
There are a lot of STMicroelectronics STM806RM6F Voltage Supervisors applications.
- Smart meter
- Insulation fault location system
- Electric heating appliances
- Precision measurement
- FPGA design
- Battery cars
- DSP
- Consumer electronics
- Display equipment
- Solar power charger
