STM806SM6F
| Parameters | |
|---|---|
| Power Dissipation | 320mW |
| Max Supply Current | 60μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.925V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 2.88V |
| Max Reset Threshold Voltage | 3V |
| Undervoltage Threshold | 2.88V |
| Overvoltage Threshold | 3V |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 320mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STM806 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 3.3/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 60μA |
| Nominal Supply Current | 60μA |
STM806SM6F Overview
This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. There is a Tape & Reel (TR)-packaging method applied to IC management. For your reference, this IC power includes a list of 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. There are 8-SOIC (0.154, 3.90mm Width) functions included in this PMIC so that you can refer to them. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 260. Manage ics operate at 3.6V supply voltages. When a supply voltage of 1 is applied to the power ic, it conducts. Surface Mount mounts IC management. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. There are a total of 8 pins on power management. The pins of the power management system count 8. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1V. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Mounting type Surface Mount is recommended. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. The supply current of the power management is 60μA. To find similar IC managements from the manufacturer, you can always search by STM806. To operate this power management, you will need at least 3.3/5V volts of power. The maximum supply temperature that PMIC chip can work with is 60μA.
STM806SM6F Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
STM806SM6F Applications
There are a lot of STMicroelectronics STM806SM6F Voltage Supervisors applications.
- Electric heating appliances
- Magnetic resonance imaging
- Dash board
- Efficient information transmission
- DC stabilized power supply module
- Precision measurement
- Consumer electronics
- Multi-voltage system
- Transformer load monitoring equipment
- Important electronics for automotive protection
