STM809MWX6F
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 320mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STM809 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 15μA |
| Nominal Supply Current | 15μA |
| Power Dissipation | 320mW |
| Max Supply Current | 15μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.38V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.31V |
| Max Reset Threshold Voltage | 4.45V |
| Threshold Voltage | +4.38V |
| Undervoltage Threshold | 4.31V |
| Overvoltage Threshold | 4.45V |
| Height | 1.02mm |
| Length | 3.04mm |
| Width | 1.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STM809MWX6F Overview
Power management is mounted through 3 terminals. There is a Tape & Reel (TR)-packaging method applied to IC management. In this IC power you will find 1 functions for you to refer to. A series of 1 channels can be found on this supervisor. IC management is packaged as a TO-236-3, SC-59, SOT-23-3 package. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. Manage ics operate at 3.3V supply voltages. In a 1 supply voltage, the PMIC chip conducts. The power management is mounted by a Surface Mount-axis. A IC power such as this can be classified as a Power Management Circuits power management system. A total of 3 pins are located on this power management. This power management system has 3 pins. Supply voltage (Vsup) should be at least 1V for this power management. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). The mounting type of the supervisors is Surface MountTemperature setting for the supervisors should be -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. There is a 15μA supply current present in the power management. It is always advisable to use STM809, the base supervisor number, when searching for similar PMICs from the manufacturer. The maximum supply temperature voltage supervisor can handle is 15μA.
STM809MWX6F Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
15μA operating supply current
STM809MWX6F Applications
There are a lot of STMicroelectronics STM809MWX6F Voltage Supervisors applications.
- Microprocessor system
- emergency room
- Automotive power systems
- Solar power charger
- Electric heating appliances
- Detection of phase imbalance
- Sensitive sensors
- Power distribution systems of CCU
- Kitchen appliances
- Fire equipment power monitoring system
