STM809RWX6F
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 320mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STM809 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 15μA |
| Nominal Supply Current | 15μA |
| Power Dissipation | 320mW |
| Max Supply Current | 15μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.63V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Nominal Input Voltage | 7V |
| Min Reset Threshold Voltage | 2.59V |
| Max Reset Threshold Voltage | 2.66V |
| Threshold Voltage | +2.63V |
| Undervoltage Threshold | 2.59V |
| Overvoltage Threshold | 2.66V |
| Height | 1.02mm |
| Length | 3.04mm |
| Width | 1.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STM809RWX6F Overview
As you can see, this power management is mounted through 3 terminals. In terms of packaging, power management follows the Tape & Reel (TR) model. To assist you, this IC power includes 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. Please find attached TO-236-3, SC-59, SOT-23-3 functions for your reference in this IC power. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 260. The supervisor is always powered by a 3.3V volt supply. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. By Surface Mount, IC management has been mounted. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. Power management has a total of 3 pins. The pins of the power management system count 3. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The recommended mounting type is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~85°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. There is a 15μA supply current present in the power management. To find similar IC managements from the manufacturer, you can always search by STM809. The maximum supply temperature voltage supervisor can handle is 15μA.
STM809RWX6F Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
15μA operating supply current
STM809RWX6F Applications
There are a lot of STMicroelectronics STM809RWX6F Voltage Supervisors applications.
- Smart meter
- Microprocessor system
- Important electronics for automotive safety
- Personal computers
- Multi-voltage system
- Network equipment
- Sensitive sensors
- Insulation fault location system
- Kitchen appliances
- Detection of phase loss
