Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 7 months ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
TO-236-3, SC-59, SOT-23-3 |
Number of Pins |
3 |
Weight |
4.535924g |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
3 |
ECCN Code |
EAR99 |
Type |
Simple Reset/Power-On Reset |
Terminal Finish |
Matte Tin (Sn) - annealed |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
320mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.95mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
STM809 |
Output |
Push-Pull, Totem Pole |
Pin Count |
3 |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1V |
Operating Supply Current |
15μA |
Nominal Supply Current |
15μA |
Power Dissipation |
320mW |
Max Supply Current |
15μA |
Adjustable Threshold |
NO |
Watchdog Timer |
No |
Reset |
Active Low |
Voltage - Threshold |
2.93V |
Number of Voltages Monitored |
1 |
Reset Timeout |
140ms Minimum |
Nominal Input Voltage |
7V |
Min Reset Threshold Voltage |
2.89V |
Max Reset Threshold Voltage |
2.96V |
Threshold Voltage |
+2.93V |
Undervoltage Threshold |
2.89V |
Overvoltage Threshold |
2.96V |
Height |
1.02mm |
Length |
3.04mm |
Width |
1.4mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
STM809SWX6F Overview
There are 3 terminals on this power management that allow it to be mounted. This power ic is packaged in a way that looks like a Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. It is possible to find on this power management a series of 1 channels. The purpose of this IC power is to provide you with a reference of TO-236-3, SC-59, SOT-23-3 functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of 260 is specified for the package. In a 3.3V supply voltage, the power management conducts. When a supply voltage of 1 is applied to the power ic, it conducts. Using Surface Mount, IC management is mounted. There is a subcategory called Power Management Circuits for this power management. 3 pins are present in total in this power management. Pin count of the power management is 3. Supply voltage (Vsup) should be at least 1V for this power management. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. In this case, Surface Mount is the recommended mounting type. You should set the supervisor's temperature during -40°C~85°C TA . The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 15μA. It is always advisable to use STM809, the base supervisor number, when searching for similar PMICs from the manufacturer. Voltage supervisor can work with a supply temperature of 15μA at the most.
STM809SWX6F Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
15μA operating supply current
STM809SWX6F Applications
There are a lot of STMicroelectronics STM809SWX6F Voltage Supervisors applications.
- Power distribution systems of CCU
- Medical-specific insulation monitor
- Fire equipment power monitoring system
- Leakage protection
- Linux and server computing
- Personal computers
- DC stabilized power supply module
- emergency room
- Sensitive sensors
- Medical-specific isolation transformer