STM810SWX6F
| Parameters | |
|---|---|
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 2.89V |
| Max Reset Threshold Voltage | 2.96V |
| Threshold Voltage | +2.93V |
| Undervoltage Threshold | 2.89V |
| Overvoltage Threshold | 2.96V |
| Height | 1.02mm |
| Length | 3.04mm |
| Width | 1.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 320mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STM810 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Max Output Current | 20mA |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 15μA |
| Nominal Supply Current | 15μA |
| Power Dissipation | 320mW |
| Max Supply Current | 15μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | 2.93V |
STM810SWX6F Overview
There are 3 mounting terminals on the voltage supervisor, each of which has a different function. Packaged in the form of a Tape & Reel (TR), power management is easy to use. For your reference, this IC power includes a list of 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. To assist you, this PMIC includes TO-236-3, SC-59, SOT-23-3 functions. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. A supply voltage of 3.3V is used to conduct the PMIC chip. Power ics operate at 1 supply voltages. The mount is provided by Surface Mount. There is a subcategory called Power Management Circuits for this power management. A total of 3 pins are located on this power management. 3 pins make up the power management. It is recommended that Vsup should not be less than 1V for this IC power. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. A Surface Mount mounting type is recommended. This range of temperature should be set for the supervisors: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. There is a 15μA supply current present in the power management. For similar manage ics search of the manufacturer, you can always refer to STM810, the base PMIC number. Voltage supervisor can work with a supply temperature of 15μA at the most.
STM810SWX6F Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
15μA operating supply current
STM810SWX6F Applications
There are a lot of STMicroelectronics STM810SWX6F Voltage Supervisors applications.
- Radar
- Stable power system
- Linux and server computing
- Insulation fault location system
- DSP
- Electric heating appliances
- Computer applications
- Set top box
- Power distribution systems of infant care room
- Microprocessor system
