STM811LW16F
| Parameters | |
|---|---|
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 320mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STM811 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 4 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 15μA |
| Nominal Supply Current | 15μA |
| Power Dissipation | 320mW |
| Max Supply Current | 15μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.63V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Nominal Input Voltage | 7V |
| Min Reset Threshold Voltage | 4.56V |
| Max Reset Threshold Voltage | 4.7V |
| Threshold Voltage | +4.63V |
| Undervoltage Threshold | 4.56V |
| Overvoltage Threshold | 4.7V |
| Height | 1.02mm |
| Length | 3.04mm |
| Width | 1.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-253-4, TO-253AA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
STM811LW16F Overview
A total of 4 terminals are used to mount this power management. Packaging is in the form of a Cut Tape (CT). For your reference, this IC power includes a list of 1 functions. A series of 1 channels can be found on this supervisor. To assist you, this PMIC includes TO-253-4, TO-253AA functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. Packages are specified to have an average peak reflow temperature of 260. When a supply voltage of 3.3V is applied to the power ic, it conducts. IC management is possible to find a succession of 1 voltages that have been checked. The mount is attached to Surface Mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. It has a total of 4 pins that are attached to IC management. There are 4 pins on the supervisor. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. A Surface Mount mounting type is recommended. Temperature setting for the supervisors should be -40°C~85°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 15μA. To find similar IC managements from the manufacturer, you can always search by STM811. The power management can work with a maximum supply temperature of 15μA.
STM811LW16F Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
15μA operating supply current
STM811LW16F Applications
There are a lot of STMicroelectronics STM811LW16F Voltage Supervisors applications.
- Refrigeration
- Dash board
- Important electronics for automotive protection
- Rechargeable batteries
- Linux and server computing
- Network equipment
- Efficient information transmission
- Power distribution systems of CCU
- Radio
- Electrical fire monitoring system
