Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 7 months ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
TO-253-4, TO-253AA |
Number of Pins |
4 |
Weight |
4.535924g |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Cut Tape (CT) |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
4 |
ECCN Code |
EAR99 |
Type |
Simple Reset/Power-On Reset |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
320mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
STM811 |
Output |
Push-Pull, Totem Pole |
Pin Count |
4 |
Max Output Current |
20mA |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1V |
Operating Supply Current |
15μA |
Nominal Supply Current |
15μA |
Power Dissipation |
320mW |
Max Supply Current |
15μA |
Adjustable Threshold |
NO |
Watchdog Timer |
No |
Reset |
Active Low |
Voltage - Threshold |
2.93V |
Number of Voltages Monitored |
1 |
Reset Timeout |
140ms Minimum |
Nominal Input Voltage |
7V |
Min Reset Threshold Voltage |
2.89V |
Max Reset Threshold Voltage |
2.96V |
Threshold Voltage |
+2.93V |
Undervoltage Threshold |
2.89V |
Overvoltage Threshold |
2.96V |
Height |
1.02mm |
Length |
3.04mm |
Width |
1.4mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
STM811SW16F Overview
There are 4 terminals on this power management that allow it to be mounted. In terms of packaging, power management follows the Cut Tape (CT) model. For your reference, this IC power includes a list of 1 functions. On this supervisor, there is a series of 1 channels that can be found. To assist you, this PMIC includes TO-253-4, TO-253AA functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. Manage ics operate at 3.3V supply voltages. When a supply voltage of 1 is applied to the power ic, it conducts. The mount is attached to Surface Mount. There is a subcategory called Power Management Circuits for this power management. The total number of pins on this power management is 4. 4 pins make up the power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. In this case, Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. The supervisor's supply current is specified to 15μA. If you want to search for similar IC managements of this manufacturer, you can always refer to STM811, which is the base power ics number. Voltage supervisor can work with a supply temperature of 15μA at the most.
STM811SW16F Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
15μA operating supply current
STM811SW16F Applications
There are a lot of STMicroelectronics STM811SW16F Voltage Supervisors applications.
- Power distribution systems of operating room
- Electrical fire monitoring system
- emergency room
- Detection of phase loss
- Power distribution systems of infant care room
- Insulation fault location system
- Functional modules
- DC stabilized power supply module
- Cloud computing
- Military electronics