STM812TW16F
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-253-4, TO-253AA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 320mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STM812 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 4 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 15μA |
| Nominal Supply Current | 15μA |
| Power Dissipation | 320mW |
| Max Supply Current | 15μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | 3.08V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 3.04V |
| Max Reset Threshold Voltage | 3.11V |
| Threshold Voltage | +3.08V |
| Undervoltage Threshold | 3.04V |
| Overvoltage Threshold | 3.11V |
| Height | 1.02mm |
| Length | 3.04mm |
| Width | 1.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STM812TW16F Overview
There are 4 terminals connected to this power management, which makes it easy to mount. A Tape & Reel (TR) package is used to package the power management. Please refer to this PMIC for 1 functions. On this supervisor, there is a series of 1 channels that can be found. In this IC management you will find TO-253-4, TO-253AA functions for you to refer to. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. Packages are specified to have an average peak reflow temperature of 260. There is a voltage supply of 3.6V for the PMIC chip, and the chip conducts at that voltage. During operation, the power ic is supplied with a voltage of 1. Power management is included in the Surface Mount mount. A IC power such as this can be classified as a Power Management Circuits power management system. A total of 4 pins are located on this power management. This power management has 4 pins. It is recommended that Vsup should not be less than 1V for this IC power. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. In this case, Surface Mount is the recommended mounting type. You should set the supervisor's temperature during -40°C~85°C TA . During operation, this power management system outputs Push-Pull, Totem Pole. The power management's supply current is 15μA. If you want to search for similar IC managements of this manufacturer, you can always refer to STM812, which is the base power ics number. The power management can work with a maximum supply temperature of 15μA.
STM812TW16F Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
15μA operating supply current
STM812TW16F Applications
There are a lot of STMicroelectronics STM812TW16F Voltage Supervisors applications.
- DSP
- Computer applications
- Kitchen appliances
- Important electronics for automotive protection
- Data storage applications
- Leakage protection
- Refrigeration
- Power communication system
- Personal computers
- Battery-powered equipment
