STM818MM6F
| Parameters | |
|---|---|
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 320mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STM818 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 60μA |
| Nominal Supply Current | 60μA |
| Power Dissipation | 320mW |
| Max Supply Current | 60μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 4.4V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.25V |
| Max Reset Threshold Voltage | 4.5V |
| Undervoltage Threshold | 4.25V |
| Overvoltage Threshold | 4.5V |
STM818MM6F Overview
This power management consists of 8 mounting terminals on which it can be mounted. Power management is packaged in a Tape & Reel (TR) way. As a reference, this IC management includes 1 functions for your convenience. Power management consists of 1 channels, each of which can be used independently. For your reference, this PMIC includes a list of 8-SOIC (0.154, 3.90mm Width) functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 5V volt supply. When 1 is applied to the power ic, it conducts. By Surface Mount, IC management has been mounted. The power management system can be categorized as a Power Management Circuits chip. The total number of pins on this power management is 8. This power management has 8 pins. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Surface Mount is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. There is a 60μA supply current present in the power management. It is always advisable to use STM818, the base supervisor number, when searching for similar PMICs from the manufacturer. The voltage supervisor requires a power source of 5V volts in order to work correctly. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 60μA.
STM818MM6F Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
STM818MM6F Applications
There are a lot of STMicroelectronics STM818MM6F Voltage Supervisors applications.
- FPGA design
- Network equipment
- Household appliances
- Low voltage/high power - AI, GPU
- Telecommunications equipment
- Multi-voltage system
- Important electronics for automotive safety
- Detection of phase loss
- Electronics installed in the vehicle
- Microcontroller system
