STM8L101F3U6ATR
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-UFQFN |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | STM8L EnergyLite |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 196mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Frequency | 16MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STM8L |
| Pin Count | 20 |
| Supply Voltage-Min (Vsup) | 1.65V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 8kB |
| Oscillator Type | Internal |
| Number of I/O | 18 |
| RAM Size | 1.5K x 8 |
| Memory Type | FLASH, ROM |
| Voltage - Supply (Vcc/Vdd) | 1.65V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | STM8 |
| Peripherals | Infrared, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 8KB 8K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| EEPROM Size | 2K x 8 |
| On Chip Program ROM Width | 8 |
| CPU Family | ST8 |
| Number of PWM Channels | 2 |
| Height Seated (Max) | 0.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
STM8L101F3U6ATR Overview
Due to its space-saving qualities, it is available in the 20-UFQFN package. Mounted using Surface Mount. You can find it in the package of Tape & Reel (TR). There is a STM8 as core processor in this device. Working at -40°C~85°C TA temperature is recommended. FLASH has been assigned to it as a program memory. The device has 18 I/Os. A comparable component can be found by using the base part number STM8L. A QUAD position is assigned to its terminals. 20 terminationals are present. The STM8L EnergyLite series includes this electrical component. By using a 3V voltage supply, high efficiency is possible. The type of memory used for data storage is FLASH, ROM. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. It is constructed using 20 pins. A method of mounting is used, which is Surface Mount. There are a total of 20 pins on it. The component is included in Microcontrollers. The devices have a maximum memory size of 8kB that can be used to store programs and data. It performs extremely well at a frequency of 16MHz. 3 timer/counters are present. It is part of the ST8 CPU family. During normal operation, the supply voltage (Vsup) should be kept above 1.65V. An oscillator type Internal is required for it to work.
STM8L101F3U6ATR Features
20-UFQFN package
Mounting type of Surface Mount
Microcontrollers subcategory
STM8L101F3U6ATR Applications
There are a lot of STMicroelectronics STM8L101F3U6ATR Microcontroller applications.
- Accu-check
- Safety -airbags, automatic braking system (ABS)
- Projector
- Petrochemical
- Automatic staplers
- Dryers
- Calculator
- Traditional industrial transformation
- Television
- Instrument control
