STM8L151C6U6
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-UFQFN Exposed Pad |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | STM8L EnergyLite |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Frequency | 16MHz |
| Base Part Number | STM8L |
| Pin Count | 48 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 1.8/3.3V |
| Supply Voltage-Min (Vsup) | 1.65V |
| Interface | I2C, IrDA, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 41 |
| RAM Size | 2K x 8 |
| Memory Type | FLASH, ROM |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | STM8 |
| Peripherals | Brown-out Detect/Reset, DMA, IR, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 32KB 32K x 8 |
| Connectivity | I2C, IrDA, SPI, UART/USART |
| Supply Current-Max | 80mA |
| Bit Size | 8 |
| Data Converter | A/D 25x12b; D/A 1x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 4 |
| ROM (words) | 32768 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 8 |
| CPU Family | ST8 |
| Height Seated (Max) | 1mm |
| Length | 7mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STM8L151C6U6 Overview
Due to its space-saving qualities, it is available in the 48-UFQFN Exposed Pad package. The way of Surface Mount is used to mount it. It comes in the package?of a Tray. Devices with STM8 core processors are available. Work should be performed at a temperature of -40°C~85°C TA. In terms of its program memory type, it is FLASH. The device has 41 I/Os. To find comparable components, use the STM8L base part number. QUAD is the location of its terminals. There are a total of 48 terminations in it. The electrical component is part of the series STM8L EnergyLite. The supply voltage of 3V allows for high efficiency. In data storage, FLASH, ROM is used as the memory type. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. For its construction, 48 pins are used. As a result, it is mounted in accordance with Surface Mount. In total, it has 48 pins. In Microcontrollers, this component is included. Data and programs can be stored on the devices with a memory size of 32kB. It is important to note that the maximum supply current is 80mA. It is powered by a 1.8/3.3V?source. This device achieves excellent efficiency at frequencies of 16MHz. A total of 4 timers/counters have been set up. It is a member of the ST8 family of CPUs. Normal operation requires a supply voltage (Vsup) that is higher than 1.65V. There is an oscillator type Internal used in this circuit.
STM8L151C6U6 Features
48-UFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
STM8L151C6U6 Applications
There are a lot of STMicroelectronics STM8L151C6U6 Microcontroller applications.
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Paper shredders
- Smart highways (navigation, traffic control, information monitoring and car service)
- Digital set-top boxes
- Automatic control
- Security systems
- Wastewater treatment
- Xbox
- Set-top boxes
- Scanners
