STM8L151G4U6
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-UFQFN |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | STM8L EnergyLite |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 286mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Frequency | 16MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | STM8L |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 1.8/3.3V |
| Supply Voltage-Min (Vsup) | 1.65V |
| Interface | I2C, IrDA, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 26 |
| RAM Size | 2K x 8 |
| Memory Type | FLASH, ROM |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | STM8 |
| Peripherals | Brown-out Detect/Reset, DMA, IR, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 16KB 16K x 8 |
| Connectivity | I2C, IrDA, SPI, UART/USART |
| Supply Current-Max | 80mA |
| Bit Size | 8 |
| Data Converter | A/D 18x12b; D/A 1x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 4 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 8 |
| CPU Family | ST8 |
| Height Seated (Max) | 0.8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STM8L151G4U6 Overview
Due to its space-saving qualities, it is available in the 28-UFQFN package. The way of Surface Mount is used to mount it. It comes in the package?of a Tray. It is equipped with a STM8 core processor. When working, it is recommended that the temperature be kept at -40°C~85°C TA. FLASH is the type of program memory used by it. 26 I/Os are present on the device. A component with the same part number as STM8L can be compared to other similar components. At QUAD, it has its terminals. 28 terminationals are present. The electrical component is part of the series STM8L EnergyLite. The supply voltage of 3V allows for high efficiency. Memory type FLASH, ROM is used for data storage. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. A total of 28 pins are required to construct this device. According to Surface Mount, it is mounted. A total of 28 pins are attached to it. This is a component included in Microcontrollers. The devices have a maximum memory size of 16kB that can be used to store programs and data. In this case, 80mA represents the maximum current supply. Power is provided by a 1.8/3.3V source. It performs extremely well at a frequency of 16MHz. It appears that there are 4 timers/counters in use. It is a member of the ST8 family of CPUs. For normal operation, the supply voltage (Vsup) should be kept above 1.65V. An oscillator of type Internal is used.
STM8L151G4U6 Features
28-UFQFN package
Mounting type of Surface Mount
Microcontrollers subcategory
STM8L151G4U6 Applications
There are a lot of STMicroelectronics STM8L151G4U6 Microcontroller applications.
- Dryers
- Electronic jamming systems
- Digital set-top boxes
- Embedded gateways
- Wastewater treatment
- Nintendo
- Gas monitoring systems
- Pacemakers (used to control abnormal heart rhythm)
- Toys
- Electromechanical control
