STM8L151K6T3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-LQFP |
| Number of Pins | 32 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tray |
| Series | STM8L EnergyLite |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 288mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.8mm |
| Frequency | 16MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STM8L |
| Pin Count | 32 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 1.8/3.3V |
| Supply Voltage-Min (Vsup) | 1.65V |
| Interface | I2C, IrDA, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 30 |
| RAM Size | 2K x 8 |
| Memory Type | FLASH, ROM |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | STM8 |
| Peripherals | Brown-out Detect/Reset, DMA, IR, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 32KB 32K x 8 |
| Connectivity | I2C, IrDA, SPI, UART/USART |
| Supply Current-Max | 80mA |
| Bit Size | 8 |
| Data Converter | A/D 22x12b; D/A 1x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 4 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 8 |
| CPU Family | ST8 |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STM8L151K6T3 Overview
For the purpose of saving space, it is available in the 32-LQFP package. Surface Mount is the way to mount it. A package of Tray contains it. The device has a STM8 core processor. In order to work effectively, the temperature should be kept at -40°C~125°C TA. The type of memory in which this program is stored is FLASH. There are 30 I/Os on it, which makes it a very simple device. A component with the same part number as STM8L can be compared to other similar components. This device has terminals at QUAD. As far as terminations are concerned, there are 32 terminations present. It is a member of the STM8L EnergyLite series of electrical components. This is due to the fact that the supply voltage is 3V, resulting in high efficiency. The type of memory used for data storage is FLASH, ROM. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. A number of 32 pins are used to construct it. According to Surface Mount, it is mounted. This device has a total of 32 pins. It belongs to the subcategory Microcontrollers. The devices have a memory size of 32kB that can be used to store programs and data. A maximum supply current of 80mA is set. A 1.8/3.3V source is used for powering it. It is highly efficient when it works at a frequency of 16MHz. It appears that there are 4 timers/counters in use. This part is part of the ST8 family of CPUs. Vsup should be kept above 1.65V for normal operation. An oscillator type Internal is required for it to work.
STM8L151K6T3 Features
32-LQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
STM8L151K6T3 Applications
There are a lot of STMicroelectronics STM8L151K6T3 Microcontroller applications.
- Vacuum cleaners
- Home appliances
- Telephone sets
- Blood pressure monitors
- Current meter
- Entertainment-radios, CD players, televisions
- Missile control
- Toys
- DDC control
- Laminators
