Parameters | |
---|---|
Factory Lead Time | 1 Week |
Mounting Type | Surface Mount |
Package / Case | 48-UFQFN Exposed Pad |
Surface Mount | YES |
Number of Pins | 48 |
Operating Temperature | -40°C~85°C TA |
Packaging | Tray |
Series | STM8L EnergyLite |
Part Status | Active |
Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
Number of Terminations | 48 |
ECCN Code | EAR99 |
Subcategory | Microcontrollers |
Max Power Dissipation | 288mW |
Technology | CMOS |
Terminal Position | QUAD |
Supply Voltage | 3V |
Frequency | 16MHz |
Base Part Number | STM8L152 |
Pin Count | 48 |
Supply Voltage-Max (Vsup) | 3.6V |
Power Supplies | 2/3.3V |
Supply Voltage-Min (Vsup) | 1.8V |
Interface | I2C, IrDA, SPI, UART, USART |
Memory Size | 64kB |
Oscillator Type | Internal |
Number of I/O | 41 |
RAM Size | 4K x 8 |
Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
Core Processor | STM8 |
Peripherals | Brown-out Detect/Reset, DMA, IR, LCD, POR, PWM, WDT |
Program Memory Type | FLASH |
Core Size | 8-Bit |
Program Memory Size | 64KB 64K x 8 |
Connectivity | I2C, IrDA, SPI, UART/USART |
Supply Current-Max | 80mA |
Bit Size | 8 |
Data Converter | A/D 25x12b; D/A 2x12b |
Watchdog Timer | Yes |
Has ADC | YES |
DMA Channels | YES |
Data Bus Width | 8b |
PWM Channels | YES |
DAC Channels | YES |
Number of Timers/Counters | 5 |
EEPROM Size | 2K x 8 |
On Chip Program ROM Width | 8 |
Height Seated (Max) | 0.6mm |
Length | 7mm |
Radiation Hardening | No |
RoHS Status | ROHS3 Compliant |
In order to maintain the benefits of a CISC architecture with improved code density, a 24-bit linear addressing space, and optimized architecture for low-power operations, the high-density and medium+ density STM8L152C8U6 ultra-low-power device includes an enhanced STM8 CPU core. This core increases processing power (up to 16 MIPS at 16 MHz).
The family has an integrated debug module with a hardware interface (SWIM) that enables rapid Flash programming and non-intrusive in-application debugging.
All STM8L152C8U6 high-density and medium+ density microcontrollers have low-power, low-voltage single-supply program Flash memory and embedded data EEPROM.
A 12-bit ADC, two DACs, two comparators, a real-time clock, four 16-bit timers, one 8-bit timer, and a number of common communication interfaces, including three USARTs, two SPIs, and an I2C interface, are all included in the devices. The STM8L152C8U6 gadget comes with an 8x40 or 4x44-segment LCD. The peripheral set's modular construction enables the use of the same peripherals across many ST microcontroller families, including 32-bit generations. This makes switching to a new family quite simple, and using a standard set of development tools makes it much simpler.
Memories
– Up to 64-Kbytes of Flash memory with up to 2 Kbytes of data EEPROM with ECC and RWW
– Flexible write/read protection modes
– Up to 4 Kbytes of RAM
2 ultra-low-power comparators
– 1 with fixed threshold and 1 rail to rail
– Wake up capability
Timers
– Three 16-bit timers with 2 channels (IC, OC, PWM), quadrature encoder
– One 16-bit advanced control timer with 3 channels, supporting motor control
– One 8-bit timer with 7-bit prescaler
– One window, one independent watchdog
– Beeper timer with 1, 2 or 4 kHz frequencies
Communication interfaces
– Two synchronous serial interface (SPI)
– Fast I2C 400 kHz SMBus and PMBus
– Three USARTs (ISO 7816 interface + IrDA)
Up to 67 I/Os, all mappable on interrupt vectors
Up to 16 capacitive sensing channels supporting touchkey, proximity, linear touch and rotary touch sensors
Fast on-chip programming and non-intrusive debugging with SWIM, Bootloader using USART
96-bit unique ID
Clock management
– 32 kHz and 1-16 MHz crystal oscillators
– Internal 16 MHz factory-trimmed RC and 38 kHz low consumption RC
– Clock security system
Low-power RTC
– BCD calendar with alarm interrupt
– Digital calibration with +/- 0.5ppm accuracy
– Advanced anti-tamper detection
LCD: 8x40 or 4x44 w/ step-up converter
DMA
– 4 ch. for ADC, DACs, SPIs, I2C, USARTs, Timers, 1 ch. for memory-to-memory
2x12-bit DAC (dual mode) with output buffer
12-bit ADC up to 1 Msps/28 channels
– Temp. sensor and internal ref. voltage
Operating conditions
– Operating power supply: 1.65 to 3.6 V
(without BOR), 1.8 to 3.6 V (with BOR)
– Temp. range: -40 to 85, 105 or 125 °C
Low-power features
– 5 low-power modes: Wait, Low-power run (5.9 μA), Low-power wait (3 μA), Activehalt with full RTC (1.4 μA), Halt (400 nA)
– Consumption: 200 μA/MHz+330 μA
– Fast wake up from Halt mode (4.7 μs)
– Ultra low leakage per I/0: 50 nA
Advanced STM8 core
– Harvard architecture and 3-stage pipeline
– Max freq: 16 MHz, 16 CISC MIPS peak
– Up to 40 external interrupt sources
Reset and supply management
– Low-power, ultra safe BOR reset with five programmable thresholds
– Ultra-low-power POR/PDR
– Programmable voltage detector (PVD)
PC peripherals, gaming, GPS and sport equipment
Alarm systems, wired and wireless sensors
Metering
Medical and handheld equipment
Application control and user interface