STMPS2141MTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 130mOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 32.5mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Current Rating | 500mA |
| Base Part Number | STMPS2141 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Operating Supply Voltage | 5.5V |
| Interface | On/Off |
| Nominal Supply Current | 40μA |
| Output Configuration | High Side |
| Power Dissipation | 32.5mW |
| Output Current | 0A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 40μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 5 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 10 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Turn On Time | 5000 μs |
| Rds On (Typ) | 110m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STMPS2141MTR Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).In the 8-SOIC (0.154, 3.90mm Width) package, it is included.This lighting drivere has a mounting type of Surface Mount.There is a General Purpose switch type associated with it.It is best to set the temperature to -40°C~125°C TJ to ensure reliable operation.It is possible to use 1 outputs in the lighting driver.Operation is based on a supply voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.The STMPS2141 family consists of this type.The termination count is 8.8 pins are used for operation.The LED driver has 1 functions.The maximum output current must drop to 500mA to meet the operation criteria.Supply voltages of 5V allow for high efficiency.In this case, it is mounted in the way of Surface Mount.A total of 8 pins are present on it.In this case, there is 130mOhm resistance in the LED driving board.As a result, the output current is set to 0A.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.It is recommended to set the supply voltage to 5.5V for optimum efficiency.This LED driving board can accept voltages up to 5.5V volts as an input.As far as input voltage goes, it has a minimum of 2.7V volts.It requires a maximum current requirement of 40μA.
STMPS2141MTR Features
Supplied from 5V
Resistance of 130mOhm
STMPS2141MTR Applications
There are a lot of STMicroelectronics STMPS2141MTR Power Switches ICs applications.
- Hot Swap
- USB Protection
- Portable Music Players
- Notebook PC
- PC Cards
- Smart Phones, Feature Phones
- Wireless Headsets
- Solid-State Drives
- HDD, SSD
- Set-top-box
