banner_page

STMPS2151MTR

N-Channel PMIC STMPS2151 8 Pin 5V 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-STMPS2151MTR
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 734
  • Description: N-Channel PMIC STMPS2151 8 Pin 5V 8-SOIC (0.154, 3.90mm Width) (Kg)

Details

Tags

Parameters
Pin Count 8
Number of Outputs 1
Output Type N-Channel
Max Output Current 500mA
Operating Supply Voltage 5.5V
Interface On/Off
Nominal Supply Current 40μA
Output Configuration High Side
Power Dissipation 32.5mW
Output Current 0A
Voltage - Supply (Vcc/Vdd) Not Required
Max Supply Current 40μA
Input Type Non-Inverting
Turn On Delay Time 5 ms
Switch Type General Purpose
Min Input Voltage 2.7V
Max Input Voltage 5.5V
Nominal Input Voltage 5V
Turn-Off Delay Time 10 ms
Ratio - Input:Output 1:1
Voltage - Load 2.7V~5.5V
Driver Number of Bits 1
Fault Protection Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO
Turn On Time 5000 μs
Rds On (Typ) 110m Ω
Built-in Protections TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE
Length 4.9mm
Width 3.9mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 6 months ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature -40°C~125°C TJ
Packaging Tape & Reel (TR)
JESD-609 Code e4
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Resistance 130mOhm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Peripheral Drivers
Max Power Dissipation 32.5mW
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Current Rating 500mA
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number STMPS2151

STMPS2151MTR Overview


As you can see, it's packaged in the way of a Tape & Reel (TR).The 8-SOIC (0.154, 3.90mm Width) package contains it.Surface Mount is the mounting type of the LED driver.The switch type is General Purpose.Ensure reliable operation by setting the temperature to -40°C~125°C TJ.There are 1 outputs available on this lighting driver.The LED driving board operates with a supply voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.As you can see, it comes from the STMPS2151 family.It contains 8 terminations.In order to operate, the 8 pins are used.Currently, there are 1 functions associated with the lighting driver.It is necessary to reduce the maximum output current to 500mA to meet the operation criteria.As long as the supply voltage is 5V, high efficiency can be achieved.This lighting driver is mounted in the way of Surface Mount.In total, it has 8 pins.130mOhm is the resistance of the lighting driver.The output current is set to 0A in this case.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.A supply voltage of 5.5V is recommended for maximum efficiency.The maximum input voltage is 5.5V volts.The input voltage minimum is 2.7V volts.It operates at a maximum current of 40μA.

STMPS2151MTR Features


Supplied from 5V
Resistance of 130mOhm

STMPS2151MTR Applications


There are a lot of STMicroelectronics STMPS2151MTR Power Switches ICs applications.

  • Wireless Modem Data Cards
  • HDD and SSD
  • Hot-Swap Systems
  • PC Cards
  • USB Protection
  • USB Power Distribution
  • Notebook and Tablet Computers
  • Telecom and Network Systems
  • Portable GPS
  • Handheld Devices

Write a review

Note: HTML is not translated!
    Bad           Good