Parameters | |
---|---|
Output Configuration | High Side |
Power Dissipation | 32.5mW |
Output Current | 500mA |
Voltage - Supply (Vcc/Vdd) | Not Required |
Max Supply Current | 40μA |
Input Type | Non-Inverting |
Turn On Delay Time | 5 ms |
Switch Type | General Purpose |
Min Input Voltage | 2.7V |
Number of Inputs | 1 |
Max Input Voltage | 5.5V |
Nominal Input Voltage | 5V |
Turn-Off Delay Time | 10 ms |
Ratio - Input:Output | 1:1 |
Voltage - Load | 2.7V~5.5V |
Driver Number of Bits | 1 |
Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
Rds On (Typ) | 90m Ω |
Max Junction Temperature (Tj) | 125°C |
Drain to Source Resistance | 90mOhm |
Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
Ambient Temperature Range High | 85°C |
On-State Resistance | 90mOhm |
Height | 1.45mm |
Length | 3mm |
Width | 1.75mm |
Radiation Hardening | No |
REACH SVHC | No SVHC |
RoHS Status | ROHS3 Compliant |
Lead Free | Lead Free |
Factory Lead Time | 1 Week |
Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
Mount | Surface Mount |
Mounting Type | Surface Mount |
Package / Case | SC-74A, SOT-753 |
Number of Pins | 5 |
Operating Temperature | -40°C~125°C TJ |
Packaging | Tape & Reel (TR) |
JESD-609 Code | e4 |
Part Status | Active |
Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
Number of Terminations | 5 |
ECCN Code | EAR99 |
Resistance | 90mOhm |
Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory | Peripheral Drivers |
Max Power Dissipation | 33.8mW |
Terminal Position | DUAL |
Terminal Form | GULL WING |
Peak Reflow Temperature (Cel) | 260 |
Number of Functions | 1 |
Supply Voltage | 5V |
Current Rating | 500mA |
Time@Peak Reflow Temperature-Max (s) | 30 |
Base Part Number | STMPS2151 |
Pin Count | 5 |
Output Voltage | 5V |
Output Type | N-Channel |
Max Output Current | 500mA |
Operating Supply Voltage | 5.5V |
Voltage | 5.5V |
Interface | On/Off |
Nominal Supply Current | 12μA |
Current | 500mA |
The STMPS2141, STMPS2151, STMPS2161, and STMPS2171 power-distribution switches are intended for applications where heavy capacitive loads and short-circuits are likely to be encountered. These devices incorporate 90 mW N-channel MOSFET high-side power switches for power distribution. These switches are controlled by a logic enable input.
90 mW high-side MOSFET switch
500/1000 mA continuous current
Thermal and short-circuit protection with
overcurrent logic output
Operating range from 2.7 to 5.5 V
CMOS and TTL compatible enable input
Undervoltage lockout (UVLO)
12 μA maximum standby supply current
Ambient temperature range, -40 to 85 °C
ESD protection: 8 kV HBM
Reverse current protection
Fault blanking
UL recognized components (UL file number:
E354278)