STMPS2151TTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 130mOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 32.5mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Current Rating | 500mA |
| Base Part Number | STMPS2151 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Operating Supply Voltage | 5.5V |
| Interface | On/Off |
| Nominal Supply Current | 40μA |
| Output Configuration | High Side |
| Power Dissipation | 32.5mW |
| Output Current | 0A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 40μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 5 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5V |
| Turn-Off Delay Time | 10 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Turn On Time | 5000 µs |
| Rds On (Typ) | 110m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Length | 4.4mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STMPS2151TTR Overview
Tape & Reel (TR) is how it's packaged.Package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) contains it.In this case, the LED driving board is mounted as Surface Mount.There is a switch type of General Purpose.Ensure reliable operation by setting the temperature to -40°C~125°C TJ.The LED driver has a total of 1 outputs.To operate, it needs a supply voltage of Not Required.It has a maximum output voltage of N-Channel volts.As you can see, it comes from the STMPS2151 family.It has a total of 8 terminations.During operation, the 8 pins are used.There are 1 functions of the LED driver.With a supply voltage of 5V, high efficiency is possible.The lighting driver is mounted in the way of Surface Mount.8 pins are equipped with it.In this case, there is 130mOhm resistance in the LED driving board.As a result, the output current is set to 0A.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.In order to optimize the efficiency of the supply voltage, it should be set to 5.5V.There is a maximum input voltage of 5.5V volts.Input voltage must be at least 2.7V volts.There is a maximum current requirement of 40μA for its operation.
STMPS2151TTR Features
Supplied from 5V
Resistance of 130mOhm
STMPS2151TTR Applications
There are a lot of STMicroelectronics STMPS2151TTR Power Switches ICs applications.
- Various applications equipped with buttons
- Smartphone and PDA
- USB Protection
- Wireless Headsets
- Portable Devices
- Hot-Swap Systems
- USB Power Distribution
- PC Cards
- Wearable Devices
- Storage (HDDs, SSDs)
