STMPS2161MTR
| Parameters | |
|---|---|
| Output Type | N-Channel |
| Max Output Current | 1A |
| Operating Supply Voltage | 5.5V |
| Interface | On/Off |
| Nominal Supply Current | 40μA |
| Output Configuration | High Side |
| Power Dissipation | 135mW |
| Output Current | 0A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 40μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 5 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Turn-Off Delay Time | 10 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Turn On Time | 5000 µs |
| Rds On (Typ) | 110m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 130mOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 130mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Current Rating | 1A |
| Base Part Number | STMPS2161 |
| Pin Count | 8 |
| Number of Outputs | 1 |
STMPS2161MTR Overview
As a result, it is packaged in the form of a Tape & Reel (TR).The 8-SOIC (0.154, 3.90mm Width) package includes it.The lighting driver has the mounting type Surface Mount.The switch type of this switch is General Purpose.It is recommended that the temperature be set to -40°C~125°C TJ for reliable performance.There are 1 outputs available on this lighting driver.The LED driving board operates with a supply voltage of Not Required.Voltage output is N-Channel volts at maximum.The STMPS2161 family contains this object.It contains 8 terminations.The 8 pins are used to operate the LED driver.It has 1 functions.The maximum output current drops to 1A in order to meet the operation criteria.High efficiency is possible at 5V supply voltage.It is positioned in the direction of Surface Mount.The LED driver has a total of 8 pins.In this LED driving board, there is 130mOhm resistance.The output current is set to 0A in this case.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.In order to maximize efficiency, the supply voltage should be set to 5.5V.As far as input voltage goes, its maximum is 5.5V volts.As a minimum input voltage, it requires 2.7V volts.For its operation, a current of 40μA is required.
STMPS2161MTR Features
Supplied from 5V
Resistance of 130mOhm
STMPS2161MTR Applications
There are a lot of STMicroelectronics STMPS2161MTR Power Switches ICs applications.
- Notebook and Tablet Computers
- Portable Music Players
- Hard Disk Drives
- Wireless Headsets
- Portable Devices
- Mobile Communication Devices
- Storage (HDDs, SSDs)
- Hot Swaps
- Portable GPS
- Solid-State Drives
