STMPS2161STR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 90mOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 130mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Current Rating | 1A |
| Base Part Number | STMPS2161 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Operating Supply Voltage | 5.5V |
| Interface | On/Off |
| Nominal Supply Current | 40μA |
| Output Configuration | High Side |
| Power Dissipation | 130mW |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 40μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 5 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5V |
| Turn-Off Delay Time | 10 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 90m Ω |
| Drain to Source Resistance | 90mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Length | 2.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STMPS2161STR Overview
The package is in the form of a Tape & Reel (TR).It is included with the SC-74A, SOT-753 package as well.A Surface Mount mounting is used for the LED driving board.General Purpose is the switch type that it owns.Keeping the temperature at -40°C~125°C TJ ensures reliable operation.As a default, the output is set to 1.A supply voltage of Not Required is required for it to operate.Voltage output is N-Channel volts at maximum.It comes under the family of STMPS2161.It contains 5 terminations.The 5 pins are used to operate the LED driver.The LED driving board has a total of 1 functions.It is possible to achieve a high level of efficiency with a supply voltage of 5V.This lighting driver is mounted in the way of Surface Mount.The LED driving board is equipped with a total of 5 pins.In this LED driving board, there is 90mOhm resistance.As a result, the output current is set to 1A.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.For maximum efficiency, the supply voltage should be set to 5.5V.A maximum input voltage of 5.5V volts can be applied to it.There is a minimum input voltage of 2.7V volts.There is a maximum current requirement of 40μA for its operation.
STMPS2161STR Features
Supplied from 5V
Resistance of 90mOhm
STMPS2161STR Applications
There are a lot of STMicroelectronics STMPS2161STR Power Switches ICs applications.
- Portable GPS Device
- Notebook PC
- USB Power Distribution
- Gaming
- Storage (HDDs, SSDs)
- Hard Disk Drives
- Wireless Headsets
- PDAs
- Hot-Swap Systems
- Portable GPS
