STMPS2161TTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 130mOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 130mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Current Rating | 1A |
| Base Part Number | STMPS2161 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1A |
| Operating Supply Voltage | 5.5V |
| Interface | On/Off |
| Nominal Supply Current | 40μA |
| Output Configuration | High Side |
| Power Dissipation | 135mW |
| Output Current | 0A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 40μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 5 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Turn-Off Delay Time | 10 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Turn On Time | 5000 μs |
| Rds On (Typ) | 110m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Length | 4.4mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STMPS2161TTR Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).Package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) contains it.This lighting drivere has a mounting type of Surface Mount.There is a switch type of General Purpose.To ensure reliable operation, the temperature should be set to -40°C~125°C TJ.In this LED driver, there are no outputs available.The LED driving board operates with a supply voltage of Not Required.It has a maximum output voltage of N-Channel volts.The STMPS2161 family contains this object.A total of 8 terminations have been recorded.8 pins are used for operation.It consists of 1 functions.This operation requires the maximum output current to be decreased to 1A.High efficiency is possible at 5V supply voltage.As a result, it is mounted in the manner of Surface Mount.There are 8 pins in total on this board.Currently, the LED driving board has 130mOhm resistance.The output current is set to 0A in this case.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.In order to maximize efficiency, the supply voltage should be set to 5.5V.A maximum input voltage of 5.5V volts can be applied to it.It has a 2.7V volt minimum input voltage.40μA is the maximum current required to operate it.
STMPS2161TTR Features
Supplied from 5V
Resistance of 130mOhm
STMPS2161TTR Applications
There are a lot of STMicroelectronics STMPS2161TTR Power Switches ICs applications.
- Storage Drives
- PDAs
- Portable GPS
- Portable Video Game Players
- Portable Music Players
- Hard Disk Drives
- Various applications equipped with buttons
- Notebook PC
- Hot-Swap Systems
- Hot Swap
