Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Resistance |
130mOhm |
Terminal Finish |
NICKEL PALLADIUM GOLD |
Subcategory |
Peripheral Drivers |
Max Power Dissipation |
130mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Current Rating |
1A |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
STMPS2171 |
Pin Count |
8 |
Number of Outputs |
1 |
Output Type |
N-Channel |
Max Output Current |
1A |
Operating Supply Voltage |
5.5V |
Interface |
On/Off |
Nominal Supply Current |
40μA |
Output Configuration |
High Side |
Power Dissipation |
135mW |
Output Current |
0A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Max Supply Current |
40μA |
Input Type |
Non-Inverting |
Turn On Delay Time |
5 ms |
Switch Type |
General Purpose |
Min Input Voltage |
2.7V |
Max Input Voltage |
5.5V |
Nominal Input Voltage |
5.5V |
Turn-Off Delay Time |
10 ms |
Ratio - Input:Output |
1:1 |
Voltage - Load |
2.7V~5.5V |
Driver Number of Bits |
1 |
Fault Protection |
Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
Turn On Time |
5000 μs |
Rds On (Typ) |
110m Ω |
Built-in Protections |
TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
Length |
4.9mm |
Width |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 6 months ago) |
STMPS2171MTR Overview
Tape & Reel (TR) is the way it's packaged.This file is included in package 8-SOIC (0.154, 3.90mm Width).Surface Mount is the mounting type of the LED driver.It owns the General Purpose switch type.The temperature should be set to -40°C~125°C TJ to ensure reliable functioning.There is a default setting of 1 for output.The LED driving board is powered by a voltage of Not Required.It has a maximum output voltage of N-Channel volts.There is a STMPS2171 family of things that it belongs to.It contains 8 terminations.For operation, we use the 8 pins.Currently, there are 1 functions associated with the lighting driver.This operation requires the maximum output current to be decreased to 1A.High efficiency is possible at 5V supply voltage.This lighting driver is mounted in the way of Surface Mount.8 pins are equipped with it.130mOhm is the resistance of the lighting driver.In this case, the output current is set to 0A.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.It is recommended that the supply voltage be set at 5.5V in order to achieve maximum efficiency.A maximum input voltage of 5.5V volts can be applied to it.There is a minimum input voltage of 2.7V volts.This system has a maximum current requirement of 40μA.
STMPS2171MTR Features
Supplied from 5V
Resistance of 130mOhm
STMPS2171MTR Applications
There are a lot of STMicroelectronics STMPS2171MTR Power Switches ICs applications.
- HDD, SSD
- HDD and SSD
- Wireless/Networking Cards
- PDAs
- Solid State Drivers
- Portable/Handheld Devices
- Handheld Devices
- Portable Video Game Players
- Portable Music Players
- Wireless Modem Data Cards