banner_page

STMPS2171STR

N-Channel PMIC STMPS2171 5 Pin 5V SC-74A, SOT-753


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-STMPS2171STR
  • Package: SC-74A, SOT-753
  • Datasheet: PDF
  • Stock: 986
  • Description: N-Channel PMIC STMPS2171 5 Pin 5V SC-74A, SOT-753 (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 6 months ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case SC-74A, SOT-753
Number of Pins 5
Operating Temperature -40°C~125°C TJ
Packaging Tape & Reel (TR)
JESD-609 Code e4
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 5
ECCN Code EAR99
Resistance 120mOhm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Peripheral Drivers
Max Power Dissipation 130mW
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Current Rating 1A
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number STMPS2171
Pin Count 5
Number of Outputs 1
Output Type N-Channel
Max Output Current 1A
Operating Supply Voltage 5.5V
Interface On/Off
Nominal Supply Current 40μA
Output Configuration High Side
Power Dissipation 130mW
Output Current 0A
Voltage - Supply (Vcc/Vdd) Not Required
Max Supply Current 40μA
Input Type Non-Inverting
Turn On Delay Time 5 ms
Switch Type General Purpose
Min Input Voltage 2.7V
Max Input Voltage 5.5V
Nominal Input Voltage 5V
Turn-Off Delay Time 10 ms
Ratio - Input:Output 1:1
Voltage - Load 2.7V~5.5V
Driver Number of Bits 1
Fault Protection Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO
Rds On (Typ) 90m Ω
Built-in Protections TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE
Length 2.9mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

STMPS2171STR Overview


As a result, it is packaged in the form of a Tape & Reel (TR).There is a package for it in the SC-74A, SOT-753 package.Surface Mount is the mounting type of the LED driver.There is a switch type of General Purpose.It is recommended that the temperature be set to -40°C~125°C TJ for reliable performance.The LED driver is equipped with 1 outputs.In order to operate, it requires a voltage supply of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.The STMPS2171 family consists of this type.There are 5 terminations in it.It is necessary to use the 5 pins in order to operate the LED driver.It is important to note that the LED driving board has 1 functions.The maximum output current drops to 1A in order to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 5V.It is positioned in the direction of Surface Mount.A total of 5 pins are present on it.It has a resistance of 120mOhm.This case results in a 0A output current.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.For maximum efficiency, the supply voltage should be set to 5.5V.The maximum input voltage of the LED driver is 5.5V volts.As a minimum input voltage, it requires 2.7V volts.For its operation, a current of 40μA is required.

STMPS2171STR Features


Supplied from 5V
Resistance of 120mOhm

STMPS2171STR Applications


There are a lot of STMicroelectronics STMPS2171STR Power Switches ICs applications.

  • USB Power Distribution
  • HDD, SSD
  • Smart Phones, Feature Phones
  • Portable/Handheld Devices
  • Hot Swaps
  • USB Power Distribution
  • Solid-State Drives
  • Mobile Communication Devices
  • Notebook PC
  • PDAs

Write a review

Note: HTML is not translated!
    Bad           Good