STMPS2171TTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 130mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 130mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Current Rating | 1A |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | STMPS2171 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 1A |
| Operating Supply Voltage | 5.5V |
| Interface | On/Off |
| Nominal Supply Current | 40μA |
| Output Configuration | High Side |
| Power Dissipation | 135mW |
| Output Current | 0A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 40μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 5 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Turn-Off Delay Time | 10 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Turn On Time | 5000 μs |
| Rds On (Typ) | 110m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Length | 4.4mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STMPS2171TTR Overview
Tape & Reel (TR) is the way it's packaged.In the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, it is included.A Surface Mount mounting is used for the LED driving board.It owns the General Purpose switch type.Ensure reliable operation by setting the temperature to -40°C~125°C TJ.There is a default setting of 1 for output.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.The STMPS2171 family contains this object.A total of 8 terminations have been recorded.8 pins are used for operation.Currently, the lighting driver has a total of 1 functions.This results in the maximum output current dropping to 1A to meet the operation criteria.The supply voltage can be 5V for high efficiency.The lighting driver is mounted in the way of Surface Mount.In total, it has 8 pins.130mOhm resistance is present in the lighting driver.In this case, the output current is set to 0A.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.A supply voltage of 5.5V is recommended for maximum efficiency.A maximum input voltage of 5.5V volts can be applied to it.The minimum input voltage is 2.7V volts.This system has a maximum current requirement of 40μA.
STMPS2171TTR Features
Supplied from 5V
Resistance of 130mOhm
STMPS2171TTR Applications
There are a lot of STMicroelectronics STMPS2171TTR Power Switches ICs applications.
- Portable Devices
- Wearable Devices
- Hot Swap
- Wireless Modem Data Cards
- PC Cards
- Portable GPS Device
- Smart Phones, Feature Phones
- Set-Top Boxes
- Hot Swap
- Low Voltage I/O System Power
