STMPS2242MTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 100mOhm |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STMPS2242 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 500mA |
| Output Configuration | High Side |
| Output Current | 0A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 500nA |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 5 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5V |
| Turn-Off Delay Time | 10 ms |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 105m Ω |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STMPS2242MTR Overview
Tape & Reel (TR) is how it's packaged.There is a 8-SOIC (0.154, 3.90mm Width) package that includes it.It has been mounted as Surface Mount on the LED driver.The switch type of this switch is General Purpose.It is recommended that the temperature be set to -40°C~125°C TJ for reliable performance.The lighting driver is equipped with 2 outputs that can be used.Operation is based on a supply voltage of Not Required.This object belongs to the STMPS2242 family.It consists of 8 terminations in total.8 pins are used for operation.It has 1 functions.Its maximum output voltage is 500mAV.It is possible to achieve a high level of efficiency with a supply voltage of 5V.The LED driving board is mounted in the way of Surface Mount.As a result, it has a total of 8 pins.Lighting drivers with 100mOhm resistance are used.As a result, the output current is set to 0A.This LED driving board uses an analog IC POWER SUPPLY SUPPORT CIRCUIT.There are a total of 2 channels available.The supply voltage should be set at 5.5V for best efficiency.A maximum input voltage of 5.5V volts can be applied to it.It has a 2.7V volt minimum input voltage.For its operation, a current of 500nA is required.
STMPS2242MTR Features
Supplied from 5V
Resistance of 100mOhm
2 channels
STMPS2242MTR Applications
There are a lot of STMicroelectronics STMPS2242MTR Power Switches ICs applications.
- Portable/Handheld Devices
- Set-Top Boxes
- Portable Music Players
- Wireless Headsets
- Wearable Devices
- Telecom and Network Systems
- USB Ports/Hubs
- Hot Swap
- Storage Drives
- Smartphone and PDA
