STMPS2242TTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 160mOhm |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | STMPS2242 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 500mA |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 0A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 5 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Turn-Off Delay Time | 10 ms |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 105m Ω |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STMPS2242TTR Overview
Cut Tape (CT) is the way it's packaged.It is included with the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package as well.This LED driving board is mounted using the mounting type Surface Mount.General Purpose is the switch type that it owns.It is recommended to set the temperature to -40°C~125°C TJ in order to ensure reliable operation.There are 2 outputs available on this lighting driver.Operation is based on a supply voltage of Not Required.It is a member of the STMPS2242 family.In total, there are 8 terminations.The operation is carried out using the 8 pins.It is important to note that the LED driving board has 1 functions.This operation requires the maximum output current to be decreased to 500mA.The supply voltage can be 5V for high efficiency.It is mounted in the way of Surface Mount.This LED driver is equipped with a total of 8 pins.The LED driver has 160mOhm resistance.It is set to 0A in this case.This gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.A total of 2 channels are available for you to choose from.In order to maximize efficiency, the supply voltage should be set to 5.5V.Its maximum input voltage is 5.5V volts.There is a minimum input voltage of 2.7V volts for this LED driver.
STMPS2242TTR Features
Supplied from 5V
Resistance of 160mOhm
2 channels
STMPS2242TTR Applications
There are a lot of STMicroelectronics STMPS2242TTR Power Switches ICs applications.
- PC Cards
- Hot-Swap Systems
- Gaming
- HDD and SSD
- Mobile Communication Devices
- Wireless Headsets
- USB Power Distribution
- Handheld Devices
- Low Voltage I/O System Power
- PDAs
