STMPS2262MTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SO |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 120mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Base Part Number | STMPS2262 |
| Number of Outputs | 2 |
| Max Output Current | 1A |
| Interface | On/Off |
| Current - Output (Max) | 1A |
| Output Configuration | High Side |
| Output Current | 0A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 5 ms |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 10 ms |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 105mOhm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STMPS2262MTR Overview
The LED driver's packaged as a Cut Tape (CT).There is a 8-SOIC (0.154, 3.90mm Width) package that includes it.A Surface Mount mounting is used for the LED driving board.This switch is of type General Purpose.It is best to set the temperature to -40°C~125°C TJ to ensure reliable operation.It is possible to use 2 outputs in the lighting driver.Operation is based on Not Required supply voltage.It is a member of the STMPS2262 family.The operation is performed through the 8 pins.In terms of output, the lighting driver can provide a maximum of 1A V.To comply with the operation criteria, the maximum output current is reduced to 1A.The lighting driver is mounted in the way of Surface Mount.It has a resistance of 120mOhm.When this case is used, the output current is set to 0A.It is recommended that the maximum operating temperature be 85°C°C to ensure stable operation.Reliability is assured with a minimum working temperature of -40°C degrees Celsius.
STMPS2262MTR Features
Resistance of 120mOhm
STMPS2262MTR Applications
There are a lot of STMicroelectronics STMPS2262MTR Power Switches ICs applications.
- Handheld Devices
- Portable GPS
- HDD, SSD
- Hard Disk Drives
- Hot-Swap Systems
- Various applications equipped with buttons
- HDD and SSD
- Hot Swap
- Wireless Headsets
- Storage Drives
