STP04CM05B1R
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Display Drivers |
| Max Power Dissipation | 1W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 30MHz |
| Base Part Number | STP04CM |
| Pin Count | 14 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3.3V |
| Nominal Supply Current | 19mA |
| Power Dissipation | 1W |
| Max Supply Current | 19mA |
| Voltage - Output | 19V |
| Topology | Shift Register |
| Current - Output / Channel | 400mA |
| Internal Switch(s) | Yes |
| High Level Output Current | 1mA |
| Low Level Output Current | -1mA |
| fmax-Min | 30 MHz |
| Number of Segments | 4 |
| Voltage - Supply (Min) | 3.3V |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 5.1mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STP04CM05B1R Overview
The 14-DIP (0.300, 7.62mm) package is used for saving board space. For the design of these LED drivers, 4 outputs are used.It is possible to mount the led driver using Through Hole.With high efficiency, it emerges as a Linear.-40°C~125°C TA is the operating temperature for the led light driver.The system operates at a frequency of 30MHz.It is designed to work with 14 terminations.This module has 14 pins as its base.Failures may occur if the voltage supply is below 3.3V.4 segments exist.This is mounted by Through Hole.The LED driver is based on part number STP04CM.The supply voltage of 5.5V is an acceptable maximum value.There is 19V voltage output from this device.In this device, there are 14 pins.According to its characteristics, it is also categorized into Display Drivers.It is designed to operate at a minimal voltage of 3.3V to achieve the highest efficiency.When the maximum supply current is less than 19mA, this device is able to provide high efficiency.It is necessary to use 5V voltage to power systems.
STP04CM05B1R Features
Available in the 14-DIP (0.300, 7.62mm) package
Operating temperature of -40°C~125°C TA
Frequency of 30MHz
Supply voltage of 5V
Operating with the supply voltage of 5V
STP04CM05B1R Applications
There are a lot of STMicroelectronics STP04CM05B1R LED Driver ICs applications.
- High-end retail lighting
- White LED Backlight for portable equipment
- Down lights
- LED headlights
- LED backlight driver for LCD displays for Tablets and Note PCs
- LED Lightings for Inspection Devices
- LED backlight driver for LCD displays for portable equipment
- Linear fluorescent
- Refrigeration lighting
- Constant Voltage Power Source for portable equipment
