STP04CM05MTR
| Parameters | |
|---|---|
| Low Level Output Current | -1mA |
| fmax-Min | 30 MHz |
| Number of Segments | 4 |
| Voltage - Supply (Min) | 3.3V |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Display Drivers |
| Max Power Dissipation | 1W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 30MHz |
| Base Part Number | STP04CM |
| Pin Count | 14 |
| Number of Outputs | 4 |
| Power Supplies | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3.3V |
| Nominal Supply Current | 19mA |
| Power Dissipation | 1W |
| Output Current | 400mA |
| Max Supply Current | 19mA |
| Voltage - Output | 19V |
| Topology | Shift Register |
| Output Current per Channel | 400mA |
| Internal Switch(s) | Yes |
| High Level Output Current | 1mA |
STP04CM05MTR Overview
14-SOIC (0.154, 3.90mm Width) saves board space. For the design of these LED drivers, 4 outputs are used.It adopts the way of Surface Mount for mounting.As a result, it appears as a Linear with a high efficiency and a high degree of reliability.At -40°C~125°C TA, the led driver is capable of operating.Based on the frequency of 30MHz, it operates on the basis of a pulse.The terminations 14 are designed for its operation.This configuration is built upon 14 pins.A voltage supply less than 3.3V could result in undetermined failures.The number of segments is estimated to be 4.There is a mounting of it by Surface Mount.Under the base part number STP04CM, you'll find this LED driver.5.5V is a reasonable voltage.The output voltage of the device is 19V.It consists of 14 pins.Additionally, it can be classified as Display Drivers based on its characteristics.The maximum efficiency standards can be met by operating at the minimal voltage of 3.3V during operation.A minimal supply current is required in order for this device to provide high efficiency.400mA is the maximum current the load can handle.
STP04CM05MTR Features
Available in the 14-SOIC (0.154, 3.90mm Width) package
Operating temperature of -40°C~125°C TA
Frequency of 30MHz
Supply voltage of 5V
STP04CM05MTR Applications
There are a lot of STMicroelectronics STP04CM05MTR LED Driver ICs applications.
- LED headlights
- General lighting
- LED backlight driver for LCD displays for portable equipment
- LED Lightings for Inspection Devices
- Down lights
- Stage Lighting and Signage
- A- lamps
- LED Lighting PFCs, Linear Dimmable
- Constant Voltage Power Source for portable equipment
- Museum lighting
