STP04CM05XTTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Display Drivers |
| Max Power Dissipation | 1W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 30MHz |
| Base Part Number | STP04CM |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3.3V |
| Nominal Supply Current | 19mA |
| Power Dissipation | 1W |
| Output Current | 400mA |
| Max Supply Current | 19mA |
| Voltage - Output | 19V |
| Topology | Shift Register |
| Min Input Voltage | 3.3V |
| Max Input Voltage | 5.5V |
| Output Current per Channel | 400mA |
| Internal Switch(s) | Yes |
| High Level Output Current | 1mA |
| Low Level Output Current | -1mA |
| fmax-Min | 30 MHz |
| Number of Segments | 4 |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STP04CM05XTTR Overview
Save board space with 16-TSSOP (0.173, 4.40mm Width) Exposed Pad package. 4 outputs are designed into LED drivers.In order to mount the led light driver, Surface Mount is used.When it emerges as a Linear, it performs extremely well and is highly reliable.The led light driver is capable of working normally at -40°C~125°C TA.Using the frequency of 30MHz, it operates.16 terminations are used in its operation.To form its configuration, 16 pins are used.The segment count is 4.It has been mounted on Surface Mount.Part number STP04CM represents this LED driver.It is acceptable to operate with a supply voltage of 5.5V.There is 19V voltage output from this device.There are 16 pins on this device.Additionally, it is categorized into Display Drivers according to its characteristics.A voltage of 3.3V is its minimal input voltage.It is designed to operate at a minimal voltage of 3.3V to achieve the highest efficiency.The maximum supply current is reached when 5.5V is reached.As long as the supply current is less than 19mA, this device can provide high efficiency.There is no current available to supply to the load.In order to power systems, 5V voltage is needed.
STP04CM05XTTR Features
Available in the 16-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TA
Frequency of 30MHz
Supply voltage of 5V
Operating with the supply voltage of 5V
STP04CM05XTTR Applications
There are a lot of STMicroelectronics STP04CM05XTTR LED Driver ICs applications.
- Medical surgery lighting
- Scanners and Handy Terminals
- A- lamps
- Other Electronic Devices
- LED Lighting PFCs, Linear Dimmable
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Down lights
- LED backlight driver for LCD displays for Tablets and Note PCs
- High-end retail lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
