STP08CL596B1
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Display Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Current Rating | 90mA |
| Frequency | 25MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | STP08C |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 14.1mA |
| Max Supply Current | 14.1mA |
| Voltage - Output | 16V |
| Topology | Shift Register |
| Internal Switch(s) | Yes |
| High Level Output Current | 1mA |
| Low Level Output Current | -1mA |
| fmax-Min | 25 MHz |
| Number of Segments | 7 |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 5.1mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STP08CL596B1 Overview
It saves board space with the 16-DIP (0.300, 7.62mm) package. In LED drivers, the outputs are all set to 8.The mounting method is Through Hole.With high reliability and efficiency, this emerges as a Linear.At -40°C~125°C TA, the led driver is capable of operating.It operates at 25MHz frequency.It operates with 16 terminations.The LED light driver is configured with a base of 0 pins.It is possible that failures will occur if the voltage supply is below 3V.There are estimated to be 7 segments.It has been mounted on Through Hole.It's under the STP08C base part number.Ideally, the supply voltage should be 3.6V.There is 16V voltage output from the device.It consists of 16 pins.Moreover, it can be classified as Display Drivers due to its characteristics.It achieves maximum efficiency with a minimal voltage supply of 3V.A minimal supply current is required in order for this device to provide high efficiency.
STP08CL596B1 Features
Available in the 16-DIP (0.300, 7.62mm) package
Operating temperature of -40°C~125°C TA
Frequency of 25MHz
Supply voltage of 3.3V
STP08CL596B1 Applications
There are a lot of STMicroelectronics STP08CL596B1 LED Driver ICs applications.
- Portable lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- LED headlights
- OLED power supply for portable equipment
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Refrigeration lighting
- General lighting
- Constant Voltage Power Source for portable equipment
- LED Lighting PFCs, Linear Dimmable
- White LED Backlight for portable equipment
