STP08CL596M
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Display Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 25MHz |
| Base Part Number | STP08C |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 14.1mA |
| Max Supply Current | 14.1mA |
| Voltage - Output | 16V |
| Topology | Shift Register |
| Current - Output / Channel | 90mA |
| Internal Switch(s) | Yes |
| High Level Output Current | 1mA |
| Low Level Output Current | -1mA |
| fmax-Min | 25 MHz |
| Number of Segments | 7 |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STP08CL596M Overview
The board's 16-SOIC (0.154, 3.90mm Width) package saves space. For the design of these LED drivers, 8 outputs are used.For mounting, it uses the Surface Mount method.Linear emerges with high efficiency and reliability.It is able to work normally at the operating temperature of -40°C~125°C TA.The frequency of 25MHz is used as the basis for its operation.A termination of 16 is used to operate the LED driver.In this LED driver, the base is configured as 16.Under 3V voltage supply, undetermined failures may occur.It is estimated that there are 7 segments.It's mounted on the way to Surface Mount.LED drivers can be found under the base part number STP08C.It is acceptable to have a maximum voltage of 3.6V.It has a voltage output of 16V.There are 16 pins on this device.As a result, it can also be classified as Display Drivers.As a result, it runs at a minimal voltage of 3V in order to achieve the best efficiency.As long as the maximum supply current is less than 14.1mA, this device is capable of providing high efficiency.
STP08CL596M Features
Available in the 16-SOIC (0.154, 3.90mm Width) package
Operating temperature of -40°C~125°C TA
Frequency of 25MHz
Supply voltage of 3.3V
STP08CL596M Applications
There are a lot of STMicroelectronics STP08CL596M LED Driver ICs applications.
- Stage Lighting and Signage
- General lighting
- Architectural lighting
- Other Electronic Devices
- Medical surgery lighting
- Auxiliary lights for on-vehicle cameras
- Replacement lamps
- LED Lightings for Industrial Equipment
- LED backlight driver for LCD displays for Tablets and Note PCs
- Amusement Machines
