STP08CP05B1
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 30MHz |
| Base Part Number | STP08C |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 13.5mA |
| Propagation Delay | 28 ns |
| Voltage - Output | 20V |
| Topology | Shift Register |
| Logic Function | Shift Register |
| Output Current per Channel | 100mA |
| Internal Switch(s) | Yes |
| Number of Input Lines | 1 |
| Number of Output Lines | 9 |
| Number of Segments | 8 |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Data Input Mode | SERIAL |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STP08CP05B1 Overview
In order to save board space, the 16-DIP (0.300, 7.62mm) package is used. As part of the design of this LED driver, there are 8 outputs that have been used.For mounting, it uses the Through Hole method.As a result, it appears as a Linear with a high efficiency and a high degree of reliability.This LED driver can be operated at a temperature of -40°C~125°C TA. It operates based on the frequency of 30MHz.There are 16 terminations associated with it.There are 16 pins used to form the base of its configuration.It is possible that failures will occur if the voltage supply is below 3V.There are estimated to be 8 segments.The mount is in the way of Through Hole.You can find this LED driver under the base part number STP08C.An acceptable maximum value for the supply voltage is 5.5V.It has a voltage output of 20V.16 pins are on the device.In addition to Display Drivers, [1] is assigned in accordance with its characteristics.In order to achieve highest efficiency standards, the supply voltage must be very low, preferably at 3V.
STP08CP05B1 Features
Available in the 16-DIP (0.300, 7.62mm) package
Operating temperature of -40°C~125°C TA
Frequency of 30MHz
Supply voltage of 5V
STP08CP05B1 Applications
There are a lot of STMicroelectronics STP08CP05B1 LED Driver ICs applications.
- LED Lightings for Inspection Devices
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- High-end retail lighting
- Down lights
- Street lighting
- Amusement Machines
- White LED Backlight for portable equipment
- LED Lightings for Industrial Equipment
- A- lamps
- LED Lighting PFCs, Linear Dimmable
