STP08CP05TTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 172.98879mg |
| Manufacturer Package Identifier | TSSOP16-0080338 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | STP08C |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 13.5mA |
| Output Current | 100mA |
| Number of Bits | 4 |
| Propagation Delay | 28 ns |
| Voltage - Output | 20V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Logic Function | Shift Register |
| Max Input Voltage | 5.5V |
| Output Current per Channel | 100mA |
| Internal Switch(s) | Yes |
| Number of Input Lines | 1 |
| Number of Output Lines | 9 |
| Number of Segments | 8 |
| Switching Frequency | 30MHz |
| Multiplexed Display Capability | NO |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STP08CP05TTR Overview
16-TSSOP (0.173, 4.40mm Width) saves board space. LED drivers designed using this technology use 8 outputs.As a mounting method, Surface Mount is used.With high reliability and efficiency, this emerges as a Linear.At -40°C~125°C TA, the led driver is capable of operating.In this case, it uses 16 terminations.It has a base configuration of 16 pins.It is estimated that there are 8 segments.Surface Mount has been mounted with the device.This LED driver has the part number STP08C.It is acceptable for the supply voltage to be 5.5V.This device produces a voltage of 20V volts.A total of 16 pins are present on this device.At a voltage of 3V, it operates at a minimal input voltage.A minimum supply voltage of 3V is required to meet the highest efficiency standards.Currently, the supply current can only reach 5.5V.100mA is the maximum current the load can handle.This electronic component may perform its functions fully if the switching frequency is maintained at 30MHz.
STP08CP05TTR Features
Available in the 16-TSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~125°C TA
Supply voltage of 5V
Switching frequency of 30MHz
STP08CP05TTR Applications
There are a lot of STMicroelectronics STP08CP05TTR LED Driver ICs applications.
- LED backlight driver for LCD displays for portable equipment
- OLED power supply for portable equipment
- Industrial LED Lighting: Image Recognition Devices
- Panel lighting
- Medical surgery lighting
- LED Lightings for Inspection Devices
- Sports Facility Lighting
- Constant Voltage Power Source for portable equipment
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- LED Lightings for Industrial Equipment
